Top Products

No entries were found
 

ECB3220

 
802.3af PoEHigh PowerPower Gear
ECB3220
802.11g High Power 400mW Wireless Access Point / Bridge with 802.3af PoE
THIS MODEL IS DISCONTINUED EOL
SUGGESTED REPLACEMENT MODEL ECB3500

Ushering in the next generation of indoor client bridges with access point functionality is the ECB-3220 by EnGenius. With the quality and functionality expected of an EnGenius product, the ECB-3220 provides up to 400mW of high wireless output power and also adds advanced features such as SNMP management, Wireless Distribution System (WDS) and Power-over-Ethernet (PoE) capability. The ECB-3220 is the perfect solution for any application you might have.

Basic Info

User Type Business
Technology 10/100 • Wireless G
Application Super Long Range • Indoor
Model Number ECB3220

Overview

KEY DIFFERENTIATORS:

HIGH 400mW WIRELESS POWER

Ensures robust signal to overcome long distances
Offers superior WiFi coverage over leading brands

MULTI-FUNCTIONAL DEVICE
Offers multi operation modes for different network topologies
Modes: Access Point / Client Bridge / Client Router
Flexible solution for various wireless applications

HIGH GAIN DETACHABLE ANTENNA DESIGN

5dBi antenna for wireless power up to 1000mW EIRP
Upgradeable antenna to increase range and receive sensitivity

UNIVERSAL REPEATER
Extends WiFi coverage into dead spots
Minimizes trenching and cabling cost

POWER-OVER-ETHERNET (802.3af) CAPABLE
Power and data over one single cable for convenient installation

INTELLIGENT QUALITY OF SERVICE (QOS) TECHNOLOGY
Facilitates bandwidth priority for VoIP, video streaming, online gaming

Specifications

HARDWARE SPECIFICATIONS:
MCU: RTL8186
Memory: 16MB SDRAM
Flash: 4MB
Physical Interface:
   LAN One 10/100 Fast Ethernet RJ-45
   Reset Button
   Power Jack
LED’s Status:
   Power (Status)
   LAN (10/100Mbps)
   WLAN (Wireless Connection)
Power Requirements:
   Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries)
   Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
   Device: 12V/1A
Regulation Certifications: FCC Part 15, CE

RF SPECIFICATIONS:
Frequency Band: 2.400–2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
   6Mbps @ -84dBm
   54Mbps @ -70dBm
IEEE 802.11b
   1Mbps @ -92dBm
   11Mbps @ -84dBm
Available Transmit Power:
IEEE 802.11g
   26dBm @ 6~24Mbps
   24dBm @ 36Mbps
   22dBm @ 48Mbps
   21dBm @ 54Mbps
IEEE 802.11b
   26dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna; RP-TNC Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure / Ad-Hoc
Operation Mode: Access Point / Client Bridge / Repeater / Client Router
LAN: DHCP Server / DHCP Client
WAN (Client Router mode): PPPoE
Router: NAT / NAPT
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
Wireless:
   Wireless Mode 802.11b / 802.11g
   Auto Channel Selection
   Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Security:
   WEP Encryption 64/128/152bits
   WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
   WPA/WPA2 Enterprise (WPA-EAP using TKIP)
   802.1x Authenticator / Radius Client (Access Point mode)
   MAC Address Filtering
   Hide SSID in Beacons
   User Isolation
   NAT (Client Router mode)
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: Private MIB
Backup & Restore: Settings Through Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)