•
•
Overview
KEY DIFFERENTIATORS:
HIGH 600mW WIRELESS POWER
Ensures robust signal to overcome long distances
Offers superior WiFi coverage over leading brands
802.11A/B/G DUAL BAND SUPPORT
Provides 2.4GHz or 5GHz wireless frequency
Operates in 5GHz band to avoid interference from 802.11b/g network devices
802.11a offers more wireless channels than 802.11b/g
MULTI-FUNCTIONAL DEVICE
Offers multi operation modes for different network topologies
Modes: Access Point / Client Bridge / WDS
Flexible solution for various wireless applications
HIGH GAIN DUAL BAND DETACHABLE ANTENNA DESIGN
5dBi antenna for wireless power up to 2000mW EIRP (up to 400mW EIRP in 802.11a)
Upgradeable antenna to increase range and receive sensitivity
POWER-OVER-ETHERNET (802.3af) CAPABLE
Power and data over one single cable for convenient installation
Specifications
HARDWARE SPECIFICATIONS:
MCU: Ubicom IP3K & Atheros AR5413 (RF)
Memory: 8MB SDRAM
Flash: 4MB
Physical Interface:
LAN One 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LED’s Status:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Connection)
Power Requirements:
Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Device: 12V/1A
Regulation Certifications: FCC Part 15, CE, DFS test compliance
RF SPECIFICATIONS:
Frequency Band:
2.4GHz: 2.400~2.484GHz
5GHz: 5.18~5.32GHz, 5.50~5.70GHz, 5.745~5.85GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11a
6Mbps @ -88dBm
54Mbps @ -70dBm
IEEE 802.11g
6Mbps @ -90dBm
54Mbps @ -74dBm
IEEE 802.11b
1Mbps @ -95dBm
11Mbps @ -90dBm
Available Transmit Power:
IEEE 802.11a
22dBm @ 6~24Mbps
20dBm @ 36Mbps
18dBm @ 48Mbps
17dBm @ 54Mbps
IEEE 802.11g
27dBm @ 6~24Mbps
25dBm @ 36Mbps
24dBm @ 48Mbps
23dBm @ 54Mbps
IEEE 802.11b
28dBm @ 1~11Mbps
Antenna: Detachable Dual Band Omni Antenna; RP-TNC Type; Peak Gain 5dBi
SOFTWARE FEATURES:
Topology: Infrastructure / Ad-Hoc
Operation Mode: Access Point / Client Bridge / WDS
LAN: DHCP Server / DHCP Client (Client Bridge mode)
Wireless:
Wireless Mode 802.11b / 802.11g / 802.11a
Auto Channel Selection
Transmission Rate:
802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
802.11a: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Security:
WEP Encryption 64/128/152bits
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
Hide SSID in Beacons
MAC Filter (Access Point mode)
Wireless STA (Client) Connected List
L2 Isolation
MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: Private MIB
Backup & Restore: Settings Through Web
ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)
