ENH200

The ENH200 features high transmitted output power, high receivable sensitivity and built-in dual polarization directional antenna, all of which extends the range of the wireless signal enabling for building-to-building bridging or connectivity to devices at greater distances when configured in Access Point mode.

Supporting highly secure WPA/WPA2 encryption and MAC address filter ensure an uncompromised network security. The ENH200 also includes RSSI signal strength indicators, a PoE injector, as well as, mast strap and wall mount accessories that all make installation easy.

The ENH200 is an ideal solution for integrators and installers to establish building-to-building wireless network connections; for service providers to use as a high performance CPE offering; or for IP security camera installers deploying cameras to monitor parking lots, streets and other venues.

+ High Power, Long-Range Coverage + Wireless N150 Speed + Built-in Directional Antenna Maximizes Wireless Connectivity + SSID-to-VLAN Tagging + User-friendly Installation Kit

Technical Specifications

Hardware

RF: 2.4 GHz Frequency Band 2.400~2.484 GHz
Standard: IEEE 802.11b/g/n
Data Rate: Up to 150 Mbps
Memory: 32MB
Flash Memory: 8MB

Antenna
One Internal 10 dBi Directional Antenna

Physical Interface
LAN 1: RJ-45 Fast Ethernet (10/100 Mbps) PoE (Power-over-Ethernet)
LAN 2: RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button in PoE Injector (Included in package)

LED Indicators
Power Status
LAN 1: Fast Ethernet PoE 
LAN 2: Fast Ethernet
WLAN
3 x Link Quality (Client Bridge mode)

Power Requirements
Active Ethernet (Power-over-Ethernet - proprietary)
Power Adapter (United States) 24V/1A

Modulation Technology
IEEE 802.11b: DBQSK, DQPSK, CCK
IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM

Operating Channels
11

Receive Sensitivity
802.11n (2.4 GHz)
-95dBm @ MCS0/MCS8
-92dBm @ MCS1/MCS9
-87dBm @ MCS2/MCS10
-85dBm @ MCS3/MCS11
-80dBm @ MCS4/MCS12
-79dBm @ MCS5/MCS13
-74dBm @ MCS5/MCS13
-73dBm @ MCS7/MCS15

802.11g (2.4 GHz)
-96dBm @ 6Mbps
-93dBm @ 9Mbps
-89dBm @ 12Mbps
-85dBm @ 18Mbps
-81dBm @ 24Mbps
-79dBm @ 36Mbps
-76dBm @ 48Mbps
-75dBm @ 54Mbps

802.11b (2.4 GHz)
-97dBm @ 1Mbps
-95dBm @ 2Mbps
-92dBm @ 5.5Mbps
-89dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (2.4 GHz)
26dBm @ MCS0/MCS8
26dBm @ MCS1/MCS9
26dBm @ MCS2/MCS10
26dBm @ MCS3/MCS11
24dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS5/MCS13
21dBm @ MCS7/MCS15

802.11g (2.4 GHz)
26dBm @ 6Mbps
26dBm @ 9Mbps
26dBm @ 12Mbps
26dBm @ 18Mbps
25dBm @ 24Mbps
24dBm @ 36Mbps
23dBm @ 48Mbps
22dBm @ 54Mbps

802.11b (2.4 GHz)
27dBm @ 1Mbps
27dBm @ 2Mbps
27dBm @ 5.5Mbps
27dBm @ 11Mbps

 

Software

Topology

Infrastructure, ad hoc (WDS Bridge)

Protocols
IEEE 802.11b/g/n (2.4 GHz)
IEEE 802.3
IEEE 802.3u

Operation Modes
Client Bridge, Client Router, WDS, Access Point
LAN DHCP server/client

VPN
Pass-through

Management
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Reset & Backup:  Reset to factory default. User can export all setting into a file via Web
MIB: MIB I, MIB II (RFC1213) and private MIB
SNMP: V1, V2c

System Monitoring
Status in hand, statistics and event log
Configuration backup, configuration restore
Ping and Trace Route

Time Setting
Manual; Auto: NTP

Wireless / Network
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Supplicant (Client Bridge Mode)
Hide SSID in beacons
Hidden SSID broadcast to prevent illegal connection
MAC Address Filtering, Up to 50 field

QoS (Quality of Service)
WMM (Wireless Multimedia)

Certifications
FCC 15B, FCC 15C, IC, CSA

Environmental & Mechanical

Temperature Range
Operating: -20ºC~70ºC/-4º~158ºF
Storage: -30ºC~80ºC/-22Fº~176ºF
Humidity (non-condensing)
0%~90% typical

Waterproof
IP55

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

ENH200 Device
Weight: 0.9 lbs.
Width: 3.31”
Length: 10.24”
Height” 2.17”

Package Contents
ENH200 N150 Outdoor Client Bridge
Power Adapter (24V/1A)
PoE Injector
Pole Mount and Wall Mount Set
Screw Set
Quick Installation Guide
CD with User Manual

Warranty
1 Year