Overview
· 12 floors in-building penetration
· 250,000 sq. ft. of facility coverage
· 3,000 acres of property, open land coverage
· Multi-Line (4-ports / line per base unit)
· Supports up to 90 DuraFon PRO or DuraWalkie handsets
· Works behind any analog port (PBX, VOIP, PSTN, FXS or POTS)
· Expandable to (8) bases for (32) line/ports
· Speakerphone
· Wireless full duplex intercom between DuraFon PRO & DuraWalkie handsets
· Broadcast Page half duplex (PTT) between DuraFon PRO & DuraWalkie handsets
· Rugged & durable designed handsets for industrial environments
· Auto Attendant
· Extended range options / Multi Location use
· Broadcast page port
· 6 hours talk time, 50 hours stand-by time
Additional DuraWalkie handsets
DuraFon PRO-BU 4 line expansion base
DuraPouch-EX protective carrying case
DuraFon-BA spare battery pack
SN-ULTRA-AK20 External antenna
Specifications
Specifications
| Electrical Specifications | Base Unit | Portable Handset |
| Frequency | 902-928 MHz | 902-928 MHz |
| RF Power | Peak: 708 mW Average: 304 mW | Peak: 708 mW Average: 76 mW |
| Channel Spacing | 200 kHz | 200 kHz |
| Number of Channels | 128 | 128 |
| Modulation | MSK | MSK |
| Multiple Access | Frequency Hopping TDMA | Frequency Hopping TDMA |
| Frequency Hopping Rate | 100 per second | 100 per second |
| TDMA Frame Length | 10 ms | 10 ms |
| Number of Slots/Frame | 8 | 8 |
| Number of Users/Carrier | 4 | 4 |
| Receiver Sensitivity | <-108 dBm (@BER 0.01) | <-108 dBm (@BER 0.01) |
| Antenna Connector | Reverse TNC | Non-Standard |
| Antenna Gain | 2 dBi 5 dBi External (optional) | 2 dBi (Long) 0.5 dBi (short) |
| TX Power Control Range | N/A | 100-708 mW |
| Telephone Interface | RJ11x4 | N/A |
| Speech Coding | 8 kbps G.729A | 8 kbps G.729A |
| Channel Coding | 8 kbps Convolutional + CRC | 8 kbps Convolutional + CRC |
| Transmission Data Rate | 170.678 kbps | 170.678 kbps |
| User Data Rate | 128 kbps duplex | 128 kbps duplex |
| Duplex | Time Division Duplex (TDD) | Time Division Duplex (TDD) |
| Voice Quality | TIA/EIA-470B | TIA/EIA-470B |
| No. of System ID | 65,536 | 65,536 |
| Ring Signal | 20-50 Hz, 12-90 Vrms | N/A |
| Auto-Attendant Coding | 8 kbps G.729 | 8 kbps G.729 |
| Flash Time | 100-900 ms programmable | N/A |
| Power Source | 120V/7V AC/DC Adapter | 3.6V, 1700mAh Li-ion Battery |
| Charger Current | N/A | 500 mA |
| Charge Time | N/A | 4 hours (from empty) |
| Regulation Compliance | FCC Part 15, Part 68 | FCC Part 15, Part 68 |
| Operating Temperature | -10~60C | -10~60C |
| Storage Temperature | -10~70C | -10~70C |
| Humidity | 20~75% | 20~75% |
| Dimension without antenna | 215Dx53Hx280W mm 11.0"x2.1"x8.5" | 58Wx31Dx161H mm |
| Weight | 32 ounces | 6.17 ounces |
DuraFon PRO-PIB10L System Includes:
· One (1) DuraFon PRO Base Unit
· Four (4) DuraFon PRO Handsets
· Eight (8) Li-Ion Battery Packs
· Four (4) AC Charging Cradles w/Power Adaptors
· Four (4) Belt Clips
· Four (4) Optimal Performance Antennas
· Four (4) Low Profile Antennas
· Four (4) DuraPouches – Handset Holsters
· One (1) External High Gain Antenna Kit w/66’ Low Loss Coax Cable
· One (1) Lighting Protection Kit