ECB3220

802.11g High Power 400mW Wireless Access Point / Bridge with 802.3af PoE
 
ECB3220
THIS MODEL IS DISCONTINUED EOL
SUGGESTED REPLACEMENT MODEL ECB3500

Ushering in the next generation of indoor client bridges with access point functionality is the ECB-3220 by EnGenius. With the quality and functionality expected of an EnGenius product, the ECB-3220 provides up to 400mW of high wireless output power and also adds advanced features such as SNMP management, Wireless Distribution System (WDS) and Power-over-Ethernet (PoE) capability. The ECB-3220 is the perfect solution for any application you might have.

Specifications

KEY DIFFERENTIATORS:

HIGH 400mW WIRELESS POWER

Ensures robust signal to overcome long distances
Offers superior WiFi coverage over leading brands

MULTI-FUNCTIONAL DEVICE
Offers multi operation modes for different network topologies
Modes: Access Point / Client Bridge / Client Router
Flexible solution for various wireless applications

HIGH GAIN DETACHABLE ANTENNA DESIGN

5dBi antenna for wireless power up to 1000mW EIRP
Upgradeable antenna to increase range and receive sensitivity

UNIVERSAL REPEATER
Extends WiFi coverage into dead spots
Minimizes trenching and cabling cost

POWER-OVER-ETHERNET (802.3af) CAPABLE
Power and data over one single cable for convenient installation

INTELLIGENT QUALITY OF SERVICE (QOS) TECHNOLOGY
Facilitates bandwidth priority for VoIP, video streaming, online gaming

HARDWARE SPECIFICATIONS:
MCU: RTL8186
Memory: 16MB SDRAM
Flash: 4MB
Physical Interface:
LAN One 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LED’s Status:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Connection)
Power Requirements:
Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Device: 12V/1A
Regulation Certifications: FCC Part 15, CE

RF SPECIFICATIONS:
Frequency Band: 2.400–2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
6Mbps @ -84dBm
54Mbps @ -70dBm
IEEE 802.11b
1Mbps @ -92dBm
11Mbps @ -84dBm
Available Transmit Power:
IEEE 802.11g
26dBm @ 6~24Mbps
24dBm @ 36Mbps
22dBm @ 48Mbps
21dBm @ 54Mbps
IEEE 802.11b
26dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna; RP-TNC Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure / Ad-Hoc
Operation Mode: Access Point / Client Bridge / Repeater / Client Router
LAN: DHCP Server / DHCP Client
WAN (Client Router mode): PPPoE
Router: NAT / NAPT
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
Wireless:
Wireless Mode 802.11b / 802.11g
Auto Channel Selection
Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator / Radius Client (Access Point mode)
MAC Address Filtering
Hide SSID in Beacons
User Isolation
NAT (Client Router mode)
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: Private MIB
Backup & Restore: Settings Through Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)