ECB3500 - EOL

802.11g High Power 600mW Wireless Access Point / Bridge / Repeater / Router with Antenna Diversity & 802.3af PoE
 
ECB3500 - EOL
ECB3500 - EOL
ECB3500 - EOL
ECB3500 is a powerful and robust enterprise-level product that supports 7 multi-functions to operate in every kind of network environment.

It supports high transmit output power and high data rate, and operates in different roles of Access Point / Client Bridge / Universal Repeater / WDS AP / WDS Bridge / AP Router / Client Router. It operates seamlessly in the 2.4GHz frequency spectrum supporting 802.11b (2.4GHz 11Mbps) and SuperG high speed (2.4GHz 108Mbps) wireless standards. It also provides output power level setting, bandwidth selection, and RSSI reading to enable the best transmitting and receiving signal for wireless communication.

For security requirements, ECB3500 can encrypt all wireless transmissions by WPA2 / WPA / WEP data encryption. ECB3500 also supports 802.1x Supplicant in Client Bridge mode and 802.1x Authenticator in Access Point mode. Those are the enhanced securities in both Access Point / Client Bridge mode. MAC Filtering lets you select any stations should have access to your network. User Isolation function could protect user information between clients. ECB3500 equips with the latest security features for your network safety.

Specifications

KEY DIFFERENTIATORS:

HIGH 600mW WIRELESS POWER

Ensures robust signal to overcome long distances
Offers superior WiFi coverage than leading brands

MULTI-FUNCTIONAL DEVICE

Offers multi operation modes for different network topologies
7 Modes: Access Point / Client Bridge / Repeater / AP Router / Client Router / WDS
Flexible solution for various wireless applications

MULTIPLE WIRELESS NAMES (AP MODE)

Broadcasts multiple SSID’s in one device
Permits different levels of network access (VLAN Tagging)

DUAL HIGH GAIN DETACHABLE ANTENNA DESIGN

Features Antenna Diversity technology to enhance wireless traffic
5dBi antenna for wireless power up to 2000mW EIRP
Upgradeable antenna to increase range and receive sensitivity

INTELLIGENT QUALITY OF SERVICE (QOS) TECHNOLOGY

Facilitates bandwidth priority for VoIP, video streaming, online gaming

POWER-OVER-ETHERNET (802.3af) CAPABLE

Power and data over one single cable for convenient installation

SUPERG 108MBPS SUPPORT

Enables high transfer speed ideal for large data payloads (with SuperG Client)

HARDWARE SPECIFICATIONS:
MCU: Atheros AR2316, 180MHz
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
LAN One 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LED’s Status:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Connection)
Power Requirements:
Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Device: 12V/1A
Regulation Certifications: FCC Part 15, CE

RF SPECIFICATIONS:

Frequency Band: 2.400–2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
6Mbps @ -92dBm
54Mbps @ -74dBm
IEEE 802.11b
1Mbps @ -97dBm
11Mbps @ -89dBm
Available Transmit Power:
IEEE 802.11g
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
22dBm @ 54Mbps
IEEE 802.11b
27dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna x2; RP-TNC Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure
Operation Mode: Client Bridge / Access Point / WDS AP / WDS Bridge / Client Router / AP Router / Universal Repeater
LAN: DHCP Server / DHCP Client
WAN (Client Router / AP Router mode): PPPoE
Router: NAT / NAPT
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
Wireless:
Wireless Mode 802.11b / 802.11g / SuperG
Channel Selection (Setting varies by Country)
Transmission Rate 802.11b/g: 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Transmit Output Power Control
Signal Strength
Security:
WEP Encryption 64/128/152bits
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator (Access Point mode)
802.1x Supplicant-TTLS (Client Bridge mode)
Hide SSID in Beacons
Multiple SSID with 802.1q VLAN Tagging (up to 4 SSID)(Access Point mode)
MAC Filter (Access Point mode)
L2 Isolation (Access Point mode)
Wireless STA (Client) Connected List
Lock to AP MAC (Client Bridge mode)
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II
Backup & Restore: Settings Through Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)