Outdoor Wireless Ethernet Bridge N300, 2.4GHz
Streamlined, Long-Range AP/Bridge Extends Point-to-Point or Point-to-Multipoint Networks
11n Speeds to 300Mbps on 2.4GHz
High 29dBm Transmit Power Extends Wireless Coverage Outdoors
Focused, 10dBi Directional Antenna Beam for Long-Range Connections
Industrial-Grade, IP65-Rated Housing Withstands Harsh Environments
PoE-Compatible 10/100 Port & Second 10/100 Port for Remote IP Cameras or APs
Flexible Operation Modes: AP, Client Bridge/Router or WDS Bridge

Product details case study

Case Studies


Extend & Maximize Wireless Coverage Outdoors, Eliminating Cable Runs

Eliminate the cost of running cable when extending access to remote buildings on the same property. Extend the network over short or long-distances with high, 29dBm output power coupled with high-gain antennas delivering connectivity up to 2 miles in clear line-of-sight to remote building connections. Its embedded 10dBi directional antenna, with focused beam, extends the network farther building-to-building.

High-Speed Support for Various Outdoor Applications

The ENH202 delivers high-performance, 11n wireless speeds to 300 Mbps on the 2.4 GHz band, supporting high-speeds to short and long-range, point-to-point (PtP) applications such as digital signage displays for schools, retail and hospitality, or outdoor POS systems. The ENH202 is also ideal for deployment in rural locations, such as farms, ranches, golf courses, and regional parks where 2.4 GHz is not as prevalent.



Optimal Performance in Harsh Indoor & Outdoor Environments

Designed to perform in harsh environments, the ENH202, industrial-grade AP features an IP65-rated waterproof and dustproof enclosure that ensures it can withstand extreme outdoor climates and indoor industrial environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat, and humidity, and indoors where temperature may be a factor.

PoE Port Powers AP & Secondary Port Serves a Remote AP or Networked Device

Two Fast Ethernet ports offer greater flexibility for outdoor deployments. Connect and power the AP with the included PoE kit, via the PoE port in locations where power outlets are scarce or unavailable, such as under the eaves of roofs, on light poles or in other remote locations. Utilize the secondary data port to connect a remote IP surveillance camera, ancillary access point, or other networked device.



Fast, Flexible Deployment Options

The ENH202 features four (4) operation modes – Access Point, Client Bridge/Router and WDS Bridge mode. This flexibility makes the Access Point/Bridge a versatile solution for IT managers and integrators who need to update or reconfigure their deployments, as their network needs dictate. Deploy the ENH202 fast and easy with the included PoE kit and flexible mounting hardware options.

Quickly View, Monitor & Reconfigure Access Points Locally or Remotely

Remotely manage APs/Bridges using SNMP tools or monitor them via EnGenius’ EZ Controller software. APs deployed on rooftops, poles or other difficult to access areas are easily reconfigured, upgraded, and monitored remotely via EZ Controller. Map-View allows installers to upload and view a facility floor plan and identify and monitor all APs on the property. EZ Controller is available for Windows, Mac OS X and Linux systems.


ENH202 Outdoor Wireless Ethernet Bridge N300, 2.4GHz

The versatile, high-speed ENH202 delivers high-performance 11n wireless speeds to 300 Mbps on the 2.4 GHz band. Utilizing its internal, focused 10dBi directional antenna beam and 29dBm output power, this Ethernet Bridge extends the network over short or long distances.

By supporting a variety of outdoor applications, the ENH202 eliminates the cost of running cable when extending access to detached buildings on the same property. Configure the device as an Access Point, Client Bridge, Client Router, or Wireless Distribution System (WDS) Bridge for greater customization in a broad range of deployment scenarios.

11n Wireless Speeds
The Ethernet Bridge supports high wireless speeds up to 300 Mbps on the 2.4 GHz band.
High-Transmit Power & Focused, Internal Antennas
Provides 29dBM transmit power and 10dBi directional antennas extending wireless coverage long-range.
IP65-Rated Waterproof Housing
With an industrial-grade waterproof and dustproof casing, the ENH202 keeps performing even in harsh environments.
Dual-Fast Ethernet Ports
Two Fast Ethernet ports support high-speed wire connections. Power the AP via its single PoE port and utilize the secondary data port for other network devices.
Versatile Operation Modes
Choose between four (4) operation modes, Access Point, Client Bridge/Router and WDS Bridge mode, depending on your application needs. The Ethernet Bridge includes a PoE Kit and mounting hardware options.

Technical Specifications

RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g/n: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32MB
Flash Memory: 8MB
Power Consumption: Up to 6W

Antenna Array
One Internal 10 dBi directional antenna

Physical Interface
LAN 1: RJ-45 Fast Ethernet (10/100 Mbps) PoE (Power-over-Ethernet)
LAN 2: RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button in PoE Injector (Included in package)

LED Indicators
Power Status
LAN 1: Fast Ethernet PoE 
LAN 2: Fast Ethernet
3 x Link Quality (Client Bridge mode)

Power Requirements
Active Ethernet (Power-over-Ethernet)
Power Adapter (United States) 24V/1A

Modulation Technology
IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM

Operating Channels

Receive Sensitivity
802.11n (2.4 GHz)
-95dBm @ MCS0/MCS8
-92dBm @ MCS1/MCS9
-87dBm @ MCS2/MCS10
-85dBm @ MCS3/MCS11
-80dBm @ MCS4/MCS12
-79dBm @ MCS5/MCS13
-74dBm @ MCS5/MCS13
-73dBm @ MCS7/MCS15
802.11g (2.4 GHz)
-96dBm @ 6Mbps
-93dBm @ 9Mbps
-89dBm @ 12Mbps
-85dBm @ 18Mbps
-81dBm @ 24Mbps
-79dBm @ 36Mbps
-76dBm @ 48Mbps
-75dBm @ 54Mbps
802.11b (2.4 GHz)
-97dBm @ 1Mbps
-95dBm @ 2Mbps
-92dBm @ 5.5Mbps
-89dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (2.4 GHz)
29dBm @ MCS0/MCS8
29dBm @ MCS1/MCS9
29dBm @ MCS2/MCS10
29dBm @ MCS3/MCS11
29dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS5/MCS13
23dBm @ MCS7/MCS15
802.11g (2.4 GHz)
29dBm @ 6Mbps
29dBm @ 9Mbps
29dBm @ 12Mbps
29dBm @ 18Mbps
27dBm @ 24Mbps
27dBm @ 36Mbps
26dBm @ 48Mbps
25dBm @ 54Mbps
802.11b (2.4 GHz)
29dBm @ 1Mbps
29dBm @ 2Mbps
29dBm @ 5.5Mbps
29dBm @ 11Mbps



Infrastructure, ad hoc (WDS Bridge)

IEEE 802.11b/g/n (2.4 GHz)
IEEE 802.3
IEEE 802.3u

Operation Modes
Client Bridge, Client Router, WDS, Access Point
LAN DHCP server/client


Firmware Upgrade: Via web browser, settings are reserved after upgrade
Reset & Backup:  Reset to factory default. User can export all setting into a file via Web
MIB: MIB I, MIB II (RFC1213) and private MIB
SNMP: V1, V2c

System Monitoring
Status in hand, statistics and event log
Configuration backup, configuration restore
Ping and Trace Route

Time Setting
Manual; Auto: NTP

Wireless / Network
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Supplicant (Client Bridge Mode)
Hide SSID in beacons
Hidden SSID broadcast to prevent illegal connection
MAC Address Filtering, Up to 50 fields

QoS (Quality of Service)
WMM (Wireless Multimedia)


Environmental & Mechanical

Temperature Range
Operating: -4º~158ºF/-20ºC~70ºC
Storage: -22Fº~176ºF/-30ºC~80ºC

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

IP55-Rated Enclosure

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

ENH202 Device
Weight: 0.9 lbs.
Width: 3.31”
Length: 10.24”
Height” 2.17”

Package Contents
ENH202 N300 Outdoor Client Bridge
Power Adapter (24V/1A)
PoE Injector
Pole Mount and Wall Mount Set
Screw Set
Quick Installation Guide
CD with User Manual

1 Year


Click the image below to see a larger version.