Refresh

This website www.engeniustech.com/eu/fr/product/ews850ap/ is currently offline. Cloudflare's Always Online™ shows a snapshot of this web page from the Internet Archive's Wayback Machine. To check for the live version, click Refresh.

EWS850AP

EWS 11ax Managed Outdoor Access Point (2×2 Dual-Band)

EWS850AP

Product Highlight

EWS850AP is the first Wi-Fi 6 outdoor solution of EnGenius. The edge 802.11ax built-in ultra-speed access point with OFDMA and MU-MIMO technology for high-density use on multiple applications.
  • Dual concurrent 802.11ax architecture and backward compatible with ac wave2/ac/a/b/g/n client devices.
  • 360° Omni-directional antennas to achieve comprehensive coverage for networking client devices under a pervasive environment.
  • Compliance with Proprietary 48V PoE Input for flexible installation and implementing remotely reset/reboot Access Point over 100 meters (328 feet).
  • Robust housing with IP67 enclosure rated to deploy at extreme weather.
  • Systemic and distributed management over EnGenius ezMaster, Skykey controller, and EWS Management switch without licensing or subscription fee.

Downloads

If you are unable to find the file, please get it in the download center.

Technical Specifications

Standard

802.11ax and ac/a/b/g/n compliance

Antenna

SMA Type interfaces 2.4 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas 5 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas Optional Solutions The alternative solution to compatible with SA2216 and SA5219 sector Antennas

Physical Interface

One (1) 10/100/1000/2500 BASE-T RJ-45 Ethernet Ports 4 x RP-SMA Connector Interfaces

LED Indicators

Display system and wireless transmission status

Power

Maximum Power Consumption

Maximum 15.9W

Power Source 802.3af/at Compliance Source Proprietary 48V-54V Active Ethernet (Power Over Ethernet, PoE)

Surge Protection

1KV

ESD Protection

Contact: 4KV Air: 8KV

Mounting

Pole Mount Wall Mount

Wireless & Radio Specifications

Access Point Type

Outdoor, IP67, dual radios concurrent, 5 GHz 802.11ax 2×2 MU-MIMO is backwards compatible with 802.11 ac/a/n mode, 2.4 GHz 802.11 ax 2×2 MU-MIMO is backwards compatible with 802.11 b/g/n.

SU-MIMO

Two(2) spatial streams SU-MIMO for 2.4 GHz and two(2) spatial streams SU-MIMO for 5 GHz up to a totally 1,774 Mbps wireless data rate to a single 11ax wireless client device under both 2.4 GHz and 5 GHz radio.

MU-MIMO

Two(2) spatial streams multi-user (MU)-MIMO for up to 1201 Mbps wire-less data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 5 GHz simultaneously. Two(2) spatial streams multi-user (MU)-MIMO for up to 574 Mbps wireless data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 2.4 GHz simultaneously.

Frequency Radio

2.4 GHz: 2400 MHz ~ 2482 MHz 5 GHz: 5150 MHz~5250 MHz, 5250 MHz~5350 MHz, 5470~5725 MHz, 5725 MHz~5850 MHz Support radios and channels will be varied in the configured regulatory domain.

Supported Radio Technology

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT) — HE 20/40/80 MHz 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz 802.11n supports high throughput (HT) — HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU

Supported Modulation Type

802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Transmit Power (Maximum Value)

2.4 GHz: 23 dBm 5 GHz: 25 dBm Maximum power is limited by regulatory domain

MU-MIMO

MU-MIMO allows multiple spatial streams to be allocated to different clients simultaneously on both download and upload sides.

OFDMA

Orthogonal frequency-division multiple access (OFDMA) allows a single transmission to be split by frequency within a channel.

Tx Beamforming (TxBF)

Increasing signal reliability and transmitting distance.

BSS Coloring

BSS coloring marks different colors on each data which will allow client devices to stop receiving a frame and return to sleep mode as soon as they recognize these frames are not of interest to them.

Target Wake Time (TWT)

The target wake time feature lets your devices to keep a radio receiver sleeping and wake it up as needed to receive periodic transmissions from an access point. The result is significant power-saving for battery-powered devices.

Supported data rates (Mbps)

802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2) 802.11ax: 2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS=1 to 2) 5 GHz: 18 to 1201 (MCS0 to MCS11, NSS=1 to 2)

Management Features

ACK timeout (Distance Control)

Set the ACK timeout to assure the proper distance to deliver wireless signal properly

Site Survey

Scan signal level of an environment to provide parameters for performing Auto Transmit power and auto channel.

Auto Transmit Power

Automatically adjust the power level

Auto Channel

Automatically assign a clear channel to perform RF transmission under a pervasive environment.

Fast Roaming (802.11k)

Collect the parameters of neighborhood Access Points to find the optimal AP. Fast Roaming (802.11v) Cognize the signal strength of client devices under each to steer these client devices to one of Access Points if the signal level is less than the default value of AP systems.

Band Steering

Steer client devices to a proper frequency band for getting more bandwidth and speed under an Access Point.

RSSI Threshold

Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality.

Multiple SSIDs

BSSID support Support 8 SSIDs on both 2.4 GHz and 5 GHz bands.

Guest Network

Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability. The function will only available on stand-alone mode.

VLAN Tag

Independent VLAN settings can be enable or disable. Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID).

VLAN Pass-through

Broadcast VLAN-tag packets to find the destination and deliver packets over the defined path. The functions allow network topology scalable and flexible.

VLAN Per SSID

Integrate VLAN ID with a SSID interface to forward packets over the defined path. The functions isolate client devices to get more security.

Management VLAN

The feature is enabled with the specified VLAN ID, the device will only allow management access with the same specified VLAN ID from a remote location by using protocols such as telnet, SSH, SNMP, Syslog, etc.

Traffic Shaping

Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point.

E-Mail Alert

Provides a network monitoring tool for administrators to stay informed of the configuration change.

Save Configuration as Users Default

Save the customized configuration as the default value for different customer demands.

Wi-Fi Scheduler

Perform a regular reboot on access point at the assigned schedule Perform it to enable or disable 2.4GHz or 5GHz interface from a period of time.

CLI

CLI Supported

RADIUS Accounting

Help operators to offload 3G to Wi-Fi seamlessly

Wireless Clients list

Provide the list to display the real status of wireless client devices on this Access Point.

Hotspot 2.0

This function will allow client devices to discover wireless Access Point under an environment and to automatically exchange data for getting authorization on accessing the Internet when roaming between Access Points.

Environmental & Physical

Temperature Range

Operating: -20°C~60°C (-4°F~140°F) Storage: -30°C~80°C (-22°F~176°F)

Humidity (non-condensing)

Operating: 0%～90% typical Storage: 0%～90% typical

Environment Protection Level

IP67

Dimensions & Weight

EWS850AP Device (w/o antennas)

Weight: 720 g Length: 7.48” (190 mm) Width: 4.88”(124 mm) Depth: 1.85(47 mm)

Compliance Regulatory

FCC

Subpart B  15 Subpart C 15.247 Subpart E 15.407

CE

EN 300 328 EN 301 893 EN 301 489 EN 50385 EN 55032 EN 55035 EN 61000

CB

IEC 60950-1 IEC 60950-22 IEC 62368-1  

Limited Lifetime Warranty (LLW)

2 Years

Model Comparison

EWS850AP

Cloud6 4x4 Outdoor

Cloud6 2x2 Outdoor

Cloud5 2x2 Outdoor

Model Number EWS850AP ECW270 ECW260 ECW160
Wi-Fi Standard 802.11ax Wi-Fi 6 (11ax) 802.11ax 802.11a/b/g/n/ac Wave 2
Radio 2.4 GHz & 5 GHz 2.4 GHz & 5 GHz 2.4 GHz & 5 GHz 2.4 GHz & 5 GHz
Max. Data Rates(2.4 GHz) 574 Mbps 1,200 Mbps 574 Mbps 400 Mbps
Max. Data Rates(5 GHz) 1,200 Mbps 2,400 Mbps 1,200 Mbps 867 Mbps
Max. Data Rates(6 GHz) - - - -
Radio Chains 2 x 2:2 4 x 4:4 2 x 2:2 2x2:2
Transmit Power on(2.4 GHz) Up to 23 dBm 24 dBm Up to 23 dBm Up to 23 dBm
Transmit Power on(5 GHz) Up to 23 dBm 24 dBm Up to 25 dBm Up to 23 dBm
Transmit Power on(6 GHz) - - - -
Antenna 4 x 5 dBi 2 x 5 dBi (2.4 GHz) Omni ; 2 x 5 dBi (5 GHz) Omni 2 x 5 dBi (2.4 GHz) Omni ; 2 x 5 dBi (5 GHz) Omni 2 x 5 dBi External Omni(2.4 GHz) ;2 x 5 dBi External Omni(5 GHz)
Power-over-Ethernet 802.3af/at 802.3 at/bt 802.3af/at 802.3af/at
Ethernet Ports 1 x 10/100/1000 Ethernet Port 1x 2.5GE PoE++ port 1x GE PSE Out port 1x 2.5GE PoE+ port 1x GE PoE+ port
Mounting Type Pole / Wall Wall/ Pole Pole / Wall Pole / Wall
Dimensions 111.2 x 173.6 x 30.29 mm 218 x 285 x 53 mm 124 x 190 x 52 mm 112 x 173 x 30 mm
Mesh Technology Yes Yes Yes Yes
Cloud To-Go app - Yes Yes Yes
EnWiFi app Yes - - -
BUY
BUY
BUY
BUY
View
View
View
View
chat-icon

Related Products

Products
Accessories
Question About Our Products?
©2024 EnGenius Networks Conditions d'utilisation Politique de confidentialité