ECB9500

High-Powered, Long-Range Wireless N300 Access Point / Client Bridge with Gigabit
 
ECB9500
ECB9500
Product Highlights

+ Wireless N300 Speed
+ Multiple Operation Modes
+ Industry Standard Security
+ SSID-to-VLAN Tagging
+ Detachable Antennas
ECB9500 is a powerful, multi-functional Wireless N300 Access Point / Client Bridge that operates in the 2.4 GHz frequency band and that can be configured to work in seven operation modes.

Overview

The ECB9500 is a smart solution for extending the reach and range of a small business network. It delivers up to 6x faster speeds and 7x extended coverage than lower-power, legacy 802.11g devices. ECB9500 provides small business networks with superior throughput, performance and unparalleled wireless range. Its user-friendly WPS button makes connection to an existing, encrypted wireless network quick and effortless.

To protect the wireless network from unauthorized access the ECB9500 supports WPA and WPA2 encryption. ECB9500 also supports IEEE 802.1x Supplicant function in Client Bridge mode. Its MAC Address Filter allows network administrators to grant or deny client devices access to the wireless network. In addition, a user isolation function protects private network between client users.

Key Features / Benefits:
+ Wireless N300 Speed
Compliant with the 802.11b/g/n standard and MIMO delivering up to 300 Mbps throughput over wireless for greater overall performance and connectivity
+ Multiple Operation Modes
Wireless-N Access Point, Client Bridge, WDS Access Point, WDS Bridge, Repeater, or AP Router
+ Gigabit Ethernet Port
Up to 10X faster data transfer than Fast Ethernet. Ideal for streaming videos, VOIP, music, and multimedia applications
+ SSID-to-VLAN Tagging
Can be configured to broadcast up to four (4) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
+ IEEE802.3af PoE Compliant
Supports Power-over-Ethernet (IEEE 802.3af) and enables deployment in ceilings and other areas where power outlets may not be available. Optional (purchased separately): Recommended PoE Injector: EnGenius EPE5818af (802.3af compliant)
+ Detachable Antennas
3 high-gain detachable omni-directional 5 dBi antennas

Specifications

HARDWARE SPECIFICATIONS:
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
LAN One 10/100/1000 Gigabit Ethernet
Reset Button
Power Jack
WPS Push Button (Wi-Fi Protected Setup)
LED’s Status:
Power (Status)
LAN (10/100/1000Mbps)
WLAN (Wireless Connection)
Power Requirements:
Power Supply: 90 to 240VDC ± 10% 50/60Hz (Depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Device: 12V/1A
Regulation Certifications: FCC Part 15/UL, CE

RF SPECIFICATIONS:
Frequency Band: 2.400–2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11n
MCS8 @ -91dBm
MCS15 @ -74dBm
IEEE 802.11g
6Mbps @ -92dBm
54Mbps @ -75dBm
IEEE 802.11b
1Mbps @ -93dBm
11Mbps @ -91dBm
Available Transmit Power:
IEEE 802.11n/g
19dBm @ 6~9Mbps / MCS9
18dBm @ 12~18Mbps / MCS11
17dBm @ 24~36Mbps / MCS13
16dBm @ 48~54Mbps / MCS15
IEEE 802.11b
18dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna x3; RP-TNC Type; Peak Gain 5dBi
Impedance: 50ohm
Frequency Range: 0~6GHz
V.S.W.R.: 1.5 (Max)
Working Voltage: <=500Vrms
Dielectric Withstanding Voltage: <=1500Vrms
Insulation Resistance: >=5000Megohms
Contact Resistance: Center contact 1.5Milliohms (Max) / Outer contact 0.2Milliohms (Max)

SOFTWARE FEATURES:
Topology: Infrastructure
Operation Mode: Client Bridge / Access Point / WDS AP / WDS Bridge / Client Router / Router / Universal Repeater
LAN: DHCP Server / DHCP Client
Wireless:
Wireless Mode 802.11b / 802.11g / 802.11n
Channel Selection (Setting varies by Country)
Signal Strength
Bandwidth Selection 40/20MHz
Transmission Rate
802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
802.11n: See Below Chart
Guard Interval 800ns                    Guard Interval 400ns
MCS  20MHz(Mbps) / 40MHz(Mbps)     20MHz(Mbps) / 40MHz(Mbps)
0              6.5                     13.5                        7.2                     15
1              13                        27                        14.4                    30
2             19.5                    40.5                       21.7                   45
3              26                        54                        28.9                    60
4              39                        81                        43.3                    90
5              52                       108                       57.8                   120
6             58.5                    121.5                      65                     135
7              65                       135                       72.2                   157.5
8              13                        27                        14.4                    30
9              26                        54                        28.9                    60
10            39                        81                        43.3                    90
11            52                       108                       57.8                   120
12            78                       162                       86.7                   180
13           104                      216                      115.6                  240
14           117                      243                       130                    270
15           130                      270                      144.4                  300
Security:
WEP Encryption 64/128bits
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
802.1x Supplicant MD5/TTLS (Client Bridge & Client Router mode)
Hide SSID in Beacons
Multiple SSID with 802.1q VLAN Tagging (up to 4 SSID)(Access Point mode)
MAC Filter (Access Point mode)
WLAN L2 Isolation (Access Point mode)
Wireless STA (Client) Connected List
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot / Reset to Factory Default
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II (RFC1213), and Private MIB
Traffic Measurement: Per Interface
Bandwidth Measurement: IP Range & Bandwidth Management
Backup & Restore: Settings Through Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)