Overview
- Simultaneous Dual-Band Wireless 802.11n Technology
- Two Access Points work together to double bandwidth and avoid interference. Supports 802.11a,b,g,n
- SmartNAT Ensures high performance when using P2P applications
- Multiple SSID
- Allows media streaming to be segmented from regular data networking
- Create a separate SSID for Guest Access
- Security & Management
- Secure Push-Button Setup
- Policy Based Parental Control for safe browsing
- Power saving management (Green Technology)
- Auto Firmware Recovery
- WEP/WPA/WPA2
- Powerful SPI Firewall
- Wireless MAC Address Filtering
- Multiple Internal Antenna Array
*Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range can vary depending on many factors including network conditions, environmental factors, distance between devices, radio interference in the operating environment, and mix of devices in the network.
Specifications
RF Specification
Frequency Band 2.400~2.484 GHz (11b, 11g, 11n), 5GHz (11a, 11n)
Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operation Channels 2.4GHz 11 for North America, 14 for Japan, 13 for Europe
5GHz North America, Europe
Wireless Settings Operation Mode – AP / Router
Wireless Mode – 11a/11b/ 11g /11n (Draft 2.0)
Channel Selection (Setting varies by Country)
Channel Bandwidth (Auto, 20Mhz, 40Mhz)
Transmission Rate – 11n only mode,11b/g/n mix mode,11b only mode,
11b/g mode, 11a mode, 11a/b/g/n mix mode
Receive Sensitivity (Typical)
11b: -91dBm
11g: -75dBm
11a: -75dBm
11n: -75dBm
Available Transmit Power
11b: 17dBm
11g: 14dBm
11a: 14dBm
11n: 15dBm
4 Internal Antenna Peak Gain = 4 dBi
Software Features
Topology Infrastructure
Operation Mode AP/Router
LAN Over 26% Power saving (Green technology)
DHCP Server
Static Routing Table
UPNP
Speed/Bandwidth monitor
WAN PPTP • PPPoE • Static IP • DHCP Client • Clone MAC address
Router NAT/ NAPT
Static Routing
Dynamic Route
Virtual server mapping
IP address mapping
Port Forwarding
Port Triggering
Special application
ALG(Application Layer Gateway) support
(RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP)
DNS Relay
DDNS
Time Zone(NTP client)
Firewall Block ICMP Ping
DoS(Blocking Ping, Port scan, Sync Flood)
MAC / IP Filtering
SPI (Stateful Packet Inspection)
DMZ (Demilitarized Zone) Host Support
Policy Based Parental Controls
Port Range / Service Filtering
Internet Domain Restriction
Dynamic URL Filtering (OEM subscription service)
VPN VPN pass-through (PPTP, L2TP, IPSEC)
Wireless Isolation
Multiple SSID
Output Power Control
WDS
Power saving(Green technology)
64/128 bit WEP Encryption
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
Wi-Fi Protection Setup (WPS)
MAC address filter
Best channel selection
QoS WMM
Application base: Priority Queue • Bandwidth Allocation
Management
Smart wizard Guides user through setup process
Configuration Web-based configuration (HTTP)
Firmware Upgrade Via webpage upgrade
Auto recovery if firmware upgrade fails
Administrator Setting Administrator password change
Idle time out
Reset Setting Reboot
Reset to Factory Default
System monitoring Speed and Bandwidth monitoring
Scheduling Enable Firewall
Enable power saving
Environment & Physical
Temperature Range
Operating: 0°C to 45°C (32°F to 113°F)
Storage: -10°C to 70°C (14°F to 158°F)
Humidity (non-condensing) 15% – 95% typical


•
