Specifications Overview
EnTurbo 11ac Wave 2 Indoor Wireless AP w/ High-Gain Antennas

EAP1300EXT

MU-MIMO Dual-Band AC1300 AP Supports Greater Signal Penetration

BUY NOW

Technical Specifications

Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE802.11a/n/ac on 5 GHz

Processor
Qualcomm® 717 MHz Quad-Core CPU
4x ARM Cortex A7

Antenna
2 x 2.4 GHz: 5 dBi
2 x 5 GHz: 5 dBi
Detachable Omni-Directional Antenna
SMA-Type
Physical Interface
1 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port
1 x DC Jack
1 x Reset Button

LED Indicators
1 x Power
1 x LAN
1 x 2.4 GHz
1 x 5 GHz

Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC /1A Power Adapter

Maximum Power Consumption
9W

Surge Protection
0.5KV


Wireless & Radio Specifications

Operating Frequency
Dual-Radio Concurrent 2.4 GHz & 5 GHz

Operation Modes
Access Point Mode (AP mode)
WDS: WDS AP, WDS Bridge

Frequency Radio
2.4 GHz: 2400 MHz ~ 2472 MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz

Transmit Power
Up to 23 dBm on 2.4 GHz
Up to 23 dBm on 5 GHz

Tx Beamforming (TxBF)

Radio Chains/Spatial Stream
2x2:2

SU-MIMO
2.4GHz - Two (2) Spatial Stream SU-MIMO up to 400 Mbps to individual 2x2
VHT40 client devices (300 Mbps for HT40 802.11n client devices)
5GHz - Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2x2
VHT40 client devices

MU-MIMO
5GHz - Two (2) Spatial Stream Multi User (MU) MIMO for up to 867Mbps to
two (2) MU-MIMO capable wireless devices simultaneously

Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)

Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 Streams

Channelization
802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz
802.11n Supports High Throughput (HT)—HT 20/40 MHz
802.11n Supports Very High Throughput (VHT) under the 2.4 GHz Radio—VHT 40 MHz (256-QAM)
802.11n/ac Packet Aggregation: AMPDU, ASPDU

Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM


Management

Multiple BSSID
Supports 16 SSIDs (8 SSIDs per Band)

VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
Cross-Band VLAN Pass-Through
Management VLAN

Spanning Tree
Supports 802.1d Spanning Tree Protocol

QoS (Quality of Service)
Complaint With IEEE 802.11e Standard
WMM

SNMP
v1, v2c, v3

MIB
I/II
Private MIB


Management Features

Deployment Options
Stand-Alone (Individually Managed)
Managed Mode (w/ezMaster & Neutron Switch)

Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Guest Network
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Band Steering
Traffic Shaping
VLANs for Access Point – Multiple SSIDs
Backup/Restore Settings
Auto Reboot
E-Mail Alert
Site Survey
Save Configuration as Default

Wireless Management Features (w/ezMaster & Neutron Switch)
AP Auto Discovery & Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Band Steering
Traffic Shaping
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP - Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic & Usage Statistics
Real-Time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
One-Click Update
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler

Control Features
Managed Mode (w/ezMaster/Neutron Switch)
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting (802.1x)
Power Save Mode (U-APSD Support)
CLI Support
HTTPS

Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation


Environmental & Physical

Temperature Range
Operating: 32ºF~104ºF (0 ºC~40 ºC)
Storage: -22 ºF~176 ºF (-30 ºC~80 ºC)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less


Device Dimensions & Weights

EAP1300EXT Device
Weight: 0.65 lbs. (0.29 kg)
Diameter: 6.36” (161.54 mm)
Height: 1.85” (47mm)

Package Contents
1 - EAP1300EXT Dual-Band AC1300 Indoor Access Point
1 - 12V/1A Power Adapter
1 - T-Rail Mounting Kits
1 - Ceiling and Wall Mount Screw Kits
1 - Mounting Brackets
1 - RJ-45 Ethernet Cables
1 - Quick Installation Guide

Certifications
FCC
CE

Warranty
1 Year


Product Highlights

EAP1300EXT features an onboard quad-core processor for turbocharged wireless performance and high-gain detachable antennas. It supports accelerated speeds, increased user device capacities, and improved connection reliability at exceptional pricing that makes next generation, business-class Wi-Fi affordably accessible.
  • Quad-Core Processor, 717 MHz “Turbo Engine”
  • 11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
  • (4) Detachable High-Gain 360-Degree RP-SMA-Type Antennas
  • Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs
  • GigE 802.3af PoE-Compliant for Easy Placement Where Power is Limited