Dual-Band N300 Indoor Wireless Access Point

Technical Specifications

Hardware
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32 MB
Flash Memory: 4 MB

Antenna
Two (2) Internal 4 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack

LEDs Indicators
Power
LAN (10/100 Mbps)
WLAN (Wireless Connection)

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
Active Ethernet (Power-Over-Ethernet, 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A

Modulations
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11

Receiver Sensitivity
802.11b (2.412~2.472 GHz) 1 Mbps @ -93 dBm
802.11b (2.412~2.472 GHz) 11 Mbps @ -89 dBm

802.11g (2.412~2.472 GHz) 6 Mbps @ -92 dBm
802.11g (2.412~2.472 GHz) 54 Mbps @ -72 dBm

802.11n (2.412~2.472 GHz) MCS8 @ -90 dBm
802.11n (2.412~2.472 GHz) MCS15 @ -70 dBm

Available Transmit Power
802.11b (2.412~2.472 GHz)
17.5 dBm @ 1~11 Mbps
802.11g/n (2.412~2.472 GHz)
18 dBm @ 6~9 Mbps /MCS9
16 dBm @ 12~18 Mbps /MCS11
14 dBm @ 24~36 Mbps / MCS13
13 dBm @ 48~54 Mbps / MCS15

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, WDS Bridge, Universal Repeater

Multiple BSSID
Supports up to 8 BSSIDs per Radio

LAN
IP (Check Validity & DHCP Server IP Range)

DHCP Server
DHCP Range, Lease Time, Client List

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11b/11g/11n
Channel Selection (Settings Vary by Country)
Channel Bandwidth (Auto, 20 MHz, 40 MHz)
Transmission Rate:
2.4 GHz: 11n Only, 11b/g/n mix, 11b Only, 11b/g, 11g Only

QoS
WMM (Wireless Multimedia)

VPN
Pass-Through (PPTP, L2TP, IPSec)

WPS
Software Only

Management

Tx Power Control
Adjust Transmit Power by dBm

Configuration
Web-Based Configuration (http)/Telnet

Telnet Server
CLI

Firmware Upgrade
Via Web Browser, Settings are Reserved After Upgrade

Administrator Setting
Administrator Username & Password Change

Reset Setting
Reboot (Press 1 Second)
Reset to Factory Default (Press 10 Seconds)

System Monitoring
Status Statistic & Event Log

SNMP
V1, V2c

MIB
MIB I, MIB II (RFC1213) & Private MIB

Traffic Measurement
Per Interface

Auto-channel Selection
Automatically Selecting Least Congested Channel

Bandwidth Measurement
IP Range & Bandwidth Management

Backup and Restore
Save & Restore Settings Through Web Interface

Diagnosis
IP Pinging Statistics

Wireless / Network
PPPoE: Point-to-Point Protocol Over Ethernet in Client Router Mode
PPTP: Point-to-Point Tunneling Protocol (PPTP)

Wireless Security
WPA/WPA2 Personal (WPA-PSK Using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP Using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID Broadcast Enable/Disable
MAC Address Filtering, Up to 50 Fields
L2 Isolation (Access Point Mode)
Wireless STA (Client) Connected List (Idle/Connection Time, Pkt Statistics)

Environmental & Physical

Temperature Range
Operating: 0 to 50º C (32º to 122º F)
Storage: -20ºC to 60ºC (-4ºF to 140º F)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications
FCC, IC, CE

Dimensions & Weights

EAP9550 Device
Weight: 0.62 lbs.
Diameter: 4.73”
Height: 2.17”

Package Contents
EAP9550 N300 Indoor Access Point
12V/1A Power Adapter
Ceiling Mount & Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Warranty
1 Year