Single-Band N300 Indoor Access Point/Desktop Bridge

Technical Specifications

Hardware
RF: 2.4 GHz Frequency Band
Standard: 802.11b/g/n
802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32 MB
Flash Memory: 4 MB
Power Consumption: Up to 9W

Antenna
Two (2) External 5 dBi Omni-Directional SMA Antennas (diversity support)

Physical Interface
1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack

LEDs Status
Power
LAN (10/100 Mbps)
WLAN (Wireless Connection)

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
Active Ethernet (Power-over-Ethernet, 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A

Modulations
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11

Receiver Sensitivity
802.11b (2.412~2.472 GHz) best ? -98 dBm
802.11g (2.412~2.472 GHz) best ? -93 dBm
802.11n (2.412~2.472 GHz) best ? -93 dBm

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11b (2.412~2.472 GHz)
29 dBm @ 1~11 Mbps
802.11g (2.412~2.472 GHz)
29 dBm @ 6 Mbps
29 dBm @ 9 Mbps
28 dBm @ 12 Mbps
28 dBm @ 18 Mbps
24 dBm @ 24 Mbps
24 dBm @ 36 Mbps
23 dBm @ 48 Mbps
23 dBm @ 54 Mbps
802.11n (2.412~2.472 GHz)
26 dBm @ MCS0/MCS8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15

Software
Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router

Multiple BSSID
Supports up to 8 BSSIDs

LAN
IP (check validity and DHCP server IP range)

DHCP Server
DHCP range, lease time, client list

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only

QoS
WMM (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only
Management

Tx Power Control
Adjust Transmit Power by dBm

Configuration
Web-Based Configuration (http)/Telnet

Telnet Server
CLI

Firmware Upgrade
Via Web Browser, Settings Reserved After Upgrade

Administrator Setting
Administrator Username & Password Change

Reset Setting
Reboot (press 1 second).
Reset to Factory Default (press 10 seconds)

System Monitoring
Status Statistic & Event Log

SNMP
V1, V2c

MIB
MIB I, MIB II (RFC1213) & Private MIB

Traffic Measurement
Per Interface

Auto-Channel Selection
Automatically Selecting Least Congested Channel

Bandwidth Measurement
IP range & Bandwidth Management

Backup & Restore
Save & Restore Settings Through Web Interface

Diagnosis
IP Pinging Statistics

Wireless / Network
PPPoE: Point-to-Point Protocol Over Ethernet in Client Router Mode
PPTP: Point-to-Point Tunneling Protocol (PPTP)

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID Broadcast Enable/Disable
MAC Address Filtering, Up to 50 Fields
L2 Isolation (Access Point Mode)
Wireless STA (Client) Connected List (Idle/Connection Time, Pkt Statistics)

Environmental & Physical

Temperature Range
Operating: 0º C to 50º C (32º F to 122º F)
Storage: -20º C to 60º C (-4Fº to 140º F)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications
FCC, IC

Dimensions & Weights

ECB300 Device
Weight: 0.77 lbs.
Length: 5.32”
Width: 4.14”
Height: 1.18”

Package Contents
ECB300 N300 Indoor Access Point/Client Bridge
12V/1A Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Warranty
1 Year