EAP300

The EAP300 is a high-powered, long-range Wireless N300 Indoor Access Point that operates in the 2.4 GHz frequency band to provide wireless connectivity to users and their wireless devices in business, hotel or educational venues. The Access Point features up to 29 dBm transmit power that delivers long-range coverage and enables its wireless signal to better penetrate walls, ceiling and floors.

The EAP300 supports WPA/WPA2 wireless encryption to protect the wireless network from unauthorized access. MAC address filtering additionally lets network administrators to select exactly which devices should have access to the network. In addition, a user isolation function can protect the private network between client users.

The attractive ceiling mount design, high performance and array of features make the EAP300 a suitable wireless solution for multi-floor buildings, hotels and offices.

+ High-power, Long-range Coverage + Wireless N300 Speed + SSID-to-VLAN Tagging + IEEE 802.3af PoE Compliant + Multiple Operation Modes + Unobtrusive Design + Internal High-Gain Antenna + EZ Controller

Technical Specifications

Hardware
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32MB
Flash Memory: 4MB

Antenna
Internal 5 dBi Omni-Directional Antenna (diversity support)

Physical Interface
1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack

LEDs Status
Power
LAN (10/100 Mbps)
WLAN (Wireless Connection)

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A

Modulations
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11

Receive Sensitivity
802.11b (2.412~2.472 GHz) best ≤ -98 dBm
802.11g (2.412~2.472 GHz) best ≤ -93 dBm
802.11n (2.412~2.472 GHz) best ≤ -93 dBm

Available Transmit Power
(Max. Power may be different depending on local regulations)

802.11b (2.412~2.472 GHz)
29 dBm @ 1~11 Mbps 
802.11g (2.412~2.472 GHz)
29 dBm @ 6 Mbps
29 dBm @ 9 Mbps
28 dBm @ 12 Mbps
28 dBm @ 18 Mbps 
24 dBm @ 24 Mbps
24 dBm @ 36 Mbps
23 dBm @ 48 Mbps
23 dBm @ 54 Mbps 

802.11n (2.412~2.472 GHz)
26 dBm @ MCS0/MCS8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15

 

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router

Multiple BSSID
Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) 

DHCP Server
DHCP range, lease time, client list)

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only

QoS
WMM  (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only

 

 

Management

Tx Power Control:
Adjust transmit power by dBm

Configuration:
Web-based configuration (http)/Telnet

Telnet Server:
CLI

Firmware Upgrade:
Via web browser, settings are reserved after upgrade

Administrator Setting:
Administrator Username and Password Change

Reset Setting:
Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring:
Status Statistic and Event Log

SNMP:
V1, V2c

MIB:
MIB I, MIB II (RFC1213) and private MIB

Traffic Measurement:
Per interface

Auto-channel Selection:
Automatically selecting least congested channel

Bandwidth Measurement:
IP range and bandwidth management

Backup and Restore:
Save and restore settings through Web interface

Diagnosis:
IP pinging statistics

Wireless / Network
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Environmental & Physical

Temperature Range
Operating: 0 to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications
FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

EAP300 Device
Weight: 0.62 lbs.
Diameter: 4.73”
Height” 1.97”

Retail Packaging
Weight: 1.7 lbs.
Length: 12”
Width: 9”
Height” 3”

Package Contents
EAP300 N300 Indoor Access Point
12V/1A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Warranty
1 Year