High-Powered, Long-Range Wireless N300 Indoor Access Point / Client Bridge with Gigabit
Expand Your Network
ECB350
High Power, Long-Range Coverage
Multiple Operation Modes
Wireless N300 Speed
Gigabit Ethernet Port / IEEE 802.3af PoE Compliant
SSID-to-VLAN Tagging
Detachable Antennas
EZ Controller™

 

High-power, Long-range Coverage

Up to 29 dBm RF Tx (transmit) power provides more than twice the wireless coverage of other access points.



Multiple Operation Modes

Offers multiple operation modes for different network topologies. 8 operation modes: Access Point/Client Bridge/Universal Repeater/WDS Bridge/WDS AP/WDS Station/AP Router/Client Router

 


 

Wireless N300 Speed

Up to 300 Mbps wireless speed ideal for large file transfers and streaming video.



Gigabit Ethernet Port

Up to 10X faster data transfer than Fast Ethernet. Ideal for streaming videos, VOIP, music, and multimedia applications

 


 

IEEE 802.3af PoE Compliant

Supports Power over Ethernet (IEEE 802.3af) and allows deployment in areas where power outlets are not available


ECB350 High-Powered, Long-Range Wireless N300 Indoor Access Point / Client Bridge with Gigabit

The EnGenius ECB350 is an ideal solution for expanding an existing network and increasing bandwidth to support additional users. This 2.4 GHz Wireless-N Indoor Access Point/Client Bridge that features up to 29 dBm RF Tx (transmit) power for long range coverage, wireless speeds up to 300 Mbps and a Gigabit Ethernet port for connecting to a switch or router.The ECB350 delivers up to 6x faster speeds and 7x extended coverage than lower-power, legacy 802.11g access points. For small-to-medium-sized business networks and for larger homes, the ECB350 provides superior throughput, performance and unparalleled wireless range.

The ECB350 features eight different operation modes to meet the changing needs of evolving business The ECB350’s robust transmit power, enhanced receive sensitivity and its MIMO (Multiple In/Multiple Out) antenna array extends wireless coverage and enhances connectivity to client devices even in areas where connections have been previously challenging or non-existent. This capability also helps to reduce the number of Access Points needed to deploy over large properties and helps to eliminate the need for roaming clients to constantly re-associate to different APs in the building or throughout the property. For deployments near ceilings or in crawlspaces where power outlets may be scarce, the ECB350 is also PoE (Power-over-Ethernet) capable when used with a PoE injector, like the 802.3af compliant EnGenius EPE5818Gaf. environments.

SSID-to-VLAN Tagging
Can be configured to broadcast up to eight (8) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
Detachable Antennas
2x 5 dBi upgradable antennas with optimized configuration and RF performance for increase wi-fi coverage and receive sensitivity
EZ Controller™
EZ Controller™ software for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks. Available as a free download. Click here for the latest version of EZ Controller

Technical Specifications


Hardware
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32MB
Flash Memory: 8MB
Power Consumption: Up to 7W

Antenna
Two (2) External 5 dBi Omni-Directional SMA Antennas (diversity support)

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
1 x Reset Button
Power Jack

LEDs Status
Power
LAN (10/100/1000 Mbps)
WLAN (Wireless Connection)


Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A

Modulations
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11


Receiver Sensitivity
802.11b (2.412~2.472 GHz) best ? -98 dBm
802.11g (2.412~2.472 GHz) best ? -93 dBm
802.11n (2.412~2.472 GHz) best ? -93 dBm

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11b (2.412~2.472 GHz)
29 dBm @ 1~11 Mbps
802.11g (2.412~2.472 GHz)
29 dBm @ 6 Mbps
29 dBm @ 9 Mbps
28 dBm @ 12 Mbps
28 dBm @ 18 Mbps
24 dBm @ 24 Mbps
24 dBm @ 36 Mbps
23 dBm @ 48 Mbps
23 dBm @ 54 Mbps
802.11n (2.412~2.472 GHz)
26 dBm @ MCS0/MCS8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15


 

Software


Topology
Infrastructure/Ad-Hoc


Operation Modes
Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router


Multiple BSSID
Supports up to 8 BSSIDs per radio


LAN
IP (check validity and DHCP server IP range)

DHCP Server
DHCP range, lease time, client list

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol


Wireless
Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only


QoS
WMM (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only


Management


Tx Power Control
Adjust transmit power by dBm

Configuration
Web-based configuration (http)/Telnet

Telnet Server
CLI

Firmware Upgrade
Via web browser, settings are reserved after upgrade

Administrator Setting
Administrator Username and Password Change

Reset Setting
Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring
Status Statistic and Event Log

SNMP
V1, V2c

MIB
MIB I, MIB II (RFC1213) and private MIB

Traffic Measurement
Per interface

Auto-channel Selection
Automatically selecting least congested channel

Bandwidth Measurement
IP range and bandwidth management

Backup and Restore
Save and restore settings through Web interface

Diagnosis
IP pinging statistics


Wireless / Network
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks


Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Environmental & Physical

Temperature Range
Operating: 0 to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications
FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights


ECB350 Device
Weight: 0.77 lbs.
Length: 5.32”
Width: 4.14”
Height: 1.18”

Package Contents
ECB350 N300 Indoor Access Point/Client Bridge
12V/1A Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Warranty
1 Year

Click the image below to see a larger version.

Click the image to zoom.