Top Products

EOA3630

The outdoor wireless device EOA3630 is a powerful business-class product with 7 multi-functions. ...

view product

Cat: Outdoor Access Points / Client Bridges

EOR7550

EOR7550 is equipped with two independent powerful RF radios which support 802.11a/b/g and 802.11n...

view product

Cat: Outdoor Access Points / Client Bridges

EOC2611P

EOC2611P is a long range outdoor wireless client bridge / access point that operates seamlessly i...

view product

Cat: Outdoor Access Points / Client Bridges

ENH200EXT

Business Class Outdoor Wireless N Long Range Access Point/Client/Bridge

EnGenius ENH200EXT is a high power long range wireless Access point/bridge operates on 2.4GHz band with 500mW power output and up to 150 Mbps maximum wireless date rate.

Featuring highly secure WPA/WPA2, WEP encryption and MAC address filter ensure an uncompromised network security. With a SMA connector on board and a SMA-N-type converter cable, it works with EnGenius EAG2408 omni directional high gain attenna* as well as any antenna with N type female connector. The installer can have the antenna of choice to create wireless network connection with miles in range**.

Designed for outdoor application, the IP65 rated device is great for high-speed wireless Internet access, connecting outdoor IP camera, connecting multiple buildings’ networks. The package also comes with PoE kit, pole mount kit. With available RSSI signal strength LED, making the installation of ENH200 easier than ever.

* antenna sold seperately
** in clear line of sight

Basic Info

User Type	Business
Technology	Wireless N
Application	Super Long Range
Model Number	ENH200EXT

Overview

Key Differentiators

• High-Power Long Range coverage
• Maximum 500mW Power output ensures robust signal overcoming long distances barrier that Provides superior Wi-Fi coverage over competitors
• High performance three time as fast as wireless G access point.
• Built-in SMA connector & included SMA-N-type conversion cable allows installers to choose different antenna for the device.
• Designed for outdoor usage with IP65 rated housing
• Supports multiple SSID/VLAN binding provide business class network security

ENH200EXT features & benefits:

• High-output power up to 27 dBm delivers superior range and coverage
• Fully interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices
• Built-in RP SMA connector & SMA-N-type conversion cable give installer to choose the type of antenna w/ different gains that perfectly fit the project.
• High-speed data rates up to 150 Mbps make the ENH200EXT ideally suited for handling heavy data payloads such outdoor security camera, video streaming, etc.
• WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network connections
• RSSI indicator makes it easy to select the best signal for Access Point connections
• Four SSIDs provides different wireless network accesses with the same access point
• Multi-function operation (Access point/Client/WDS bridge/WDS AP) modes provide extremely flexible deployment
• WMM Quality of Service (QoS) support enhances performance and user experiences

* Antenna is not included in the package. Installation engineer need to determin antenna type, gain for specific installation need.

Specifications

SPECIFICATIONS:

Hardware Specifications
MCU: Atheros AR7240
Memory: 32 MB
Flash: 8 MB
Physical Interface: 10/100 Fast Ethernet port x 1
One Reset button
LED’s Status:
Power (Status)
LAN1 (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
Power requirements:
Active Ethernet: (Power over Ethernet) Proprietary PoE design
Power Adapter: 24VDC / 0.6A

RF SPECIFICATIONS:

Wireless standard
IEEE802.11 b/g/n
Frequency Band: 2.412 ~ 2.472GH (b/g/n)
Modulation Technologies: IEEE 802.11b: DBQSK, DQPSK, CCK
IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM
Operating Channels:
11 channels
Transmit Power
802.11b (2.412 ~ 2.472GHz)
27 dBm@1Mbps
27 dBm@2Mbps
27 dBm@5.5Mbps
27 dBm@11Mbps

802.11g(2.412 ~ 2.472GHz)
26dBm@6Mbps
26dBm@9Mbps
26dBm@12Mbps
26dBm@18Mbps
25dBm@24Mbps
24dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps

802.11n(2.412 ~ 2.472GHz)
MCS0 / MCS8 26dBm
MCS1 / MCS9 26dBm
MCS2 / MCS10 26dBm
MCS3 / MCS11 26dBm
MCS4 / MCS12 24dBm
MCS5 / MCS13 23dBm
MCS6 / MCS14 22dBm
MCS7 / MCS15 21dBm
Receiver Sensitivity (Typical):
802.11b(2.412 ~ 2.472GHz)
-97dBm@1Mbps
-95dBm@2Mbps
-92dBm@5.5Mbps
-89dBm@11Mbps

802.11g(2.412 ~ 2.472GHz)
-96dBm@6Mbps
-93dBm@9Mbps
-89dBm@12Mbps
-85dBm@18Mbps
-81dBm@24Mbps
-79dBm@36Mbps
-76dBm@48Mbps
-75dBm@54Mbps

802.11n(2.412 ~ 2.472GHz)
MCS0 / MCS8 -95dBm
MCS1 / MCS9 -92dBm
MCS2 / MCS10 -87dBm
MCS3 / MCS11 -85dBm
MCS4 / MCS12 -80dBm
MCS5 / MCS13 -79dBm
MCS6 / MCS14 -74dBm
MCS7 / MCS15 -73dBm

Antenna: Built-in RP SMA connector & SMA-N-type conversion cable
Antenna not included
Frequency Band Range: 2.4 GHz ~ 2.5 GHz

SOFTWARE FEATURES:

Topology: Infrastructure
Protocol: IEEE802.3, 802.3U, 802.11 b/g/n (2.4 GHz)
Operation mode: Client Bridge/Access Point/WDS bridge/Client Router
Service: DHCP server/client
VPN: VPN Pass-through
Networking: PPPoE, PPTP
Narrow bandwidth (selectable 5MHz/10MHz/20MHz/40MHz )

MANAGEMENT:

Firmware upgrade: Reset & Backup, Ping & Trace Route
MIB: MIB I, MIB II(RFC1213), Private MIB
SNMP: SNMP v1, v2c
Security:
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS
WMM (Wi-Fi Multimedia)

ENVIRONMENT & PHYSICAL:

Temperature Range
Operating: -20°C to 70°C (-4°F to 158°F)
Storage: -30°C to 80°C (-22°F to 176°F)
Humidity (non-condensing): 0%～90% typical
Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
Weight: 0.9 Ib
Certifications: FCC, CE, IC

Downloads

Photos

Troubleshooting FAQs

What is the default IP address of the ENH200EXT?

The default IP address is 192.168.1.1.

I powered up the unit but cannot find signal more than 5 feet away

You need to attach an external antenna to the antenna connector. You can use an N type external cable connects to the conversion cable included in the package, and connect the conversion cable to the on-board connector.

I plugged the PoE to the Ethernet port on the back of ENH200EXT but the unit is not on, how come?

You need to plug the Ethernet cable connect to PoE injector, and connect the power adapter comes with the package to the “DC IN” port on the PoE injector.

I plugged an Ethernet cable from the PoE switch to the LAN port of ENH200EXT, how come it does not work?

The ENH200EXT uses a proprietary PoE injector and will not work with standard 802.3af-compliant PoE switches.

How come I cannot change the IP address to the one I specified after I click "Accept"?

Clicking Accept does not apply the changes. To apply them, use Status > Save/Load. This is a safety feature the ENH series provide to allow user go over all configurations before commence them.

How come the device does not take the configs I put in?

Clicking Accept does not apply the changes. To apply them, use Status > Save/Load. This is a safety feature the ENH series provide to allow user go over all configurations before commence them.

What kind of antenna works with ENH200EXT?

The ENH200EXT does not have an internal antenna but provide an external RP-SMA connector next to the Ethernet port. The package also include a SMA - N type conversion cable. Use the device as an access point, you need to decide whether you need an external directional atenna or omni directional antenna. You need to buy the antenna with the right gain number for your project. Whether it will be directional or omni directional antenna, it needs to have a N type female adapter to work with ENH200EXT.

I set up one ENH200EXT with high-gain antenna on first building; and one ENH200 each on two other buildings roughly 250 feet away from the first one and get good connection and throughput. But when I took my laptop walk out of the first building for merely 120 feet I lost connection to the Internet, how come?

The reason why the two other ENH200s can get good connections with the ENH200EXT because all three devices have 500mW power output with either built-in or attached high-gain antennas. Your laptop might have a wireless module with regular power (40-70mW). Therefore, the laptop does not have enough power to shoot the signal back to the ENH200EXT to keep the connection up. We recommend EnGenius EUB9603_H to be the client for your laptop. The EUB has high power output.