The ENS200 is compliant with the IEEE802.11 b/g/n standards delivering a wireless data rate of up to 150 Mbps. It features an internal directional 7 dBi MIMO (Multiple In/Multiple Out) antenna that coupled with its strong transmit power of up to 400mW makes the ENS200 a compelling performance solution for small and growing businesses at a very affordable price. The ENS200 can also be used in other operational modes including as an Access Point. When used as an Access Point it should be positioned in such a way, because of its more focused directional antenna signal array, to offer wireless network connectivity to a more defined outdoor venue rather than a more general outdoor area around it.
ENS200 also features a robust security feature set that includes support for WPA/WPA2 Personal and Enterprise encryption, 802.1x RADIUS authentication, hidden SSID and MAC address filtering.
The ENS202 has an IP65 rated weatherproof housing that ensures continued operation in harsh outdoor environments or in climates of extreme cold, heat or continuous moisture.
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g. Supports Wireless N technology.
Data Rate: Up to 150 Mbps
Flash Memory: 8MB
Internal 8 dBi Directional Antenna with Dual Polarization
2 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A
Operation Modes: Access Point, Client Bridge, Client Router, WDS
Wireless / Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
VLAN Tagging, VLA Pass-through
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
Hide SSID in beacons
MAC Address Filtering, Up to 50 field
Wireless STA (Client) connected list
QoS (Quality of Service)
WMM (Wireless Multimedia)
Environmental & Mechanical
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights
Weight: 0.67 lbs.
Weight: 1.56 lbs.
ENS200 Client Bridge/Access Point
PoE Injector (EPE1212)
Pole Mount Set
Quick Start Guide
Technical Support Card