Extend your network to another building and avoid 2.4 GHz traffic
|<||High 400mW Wireless Power Delivers Long-Range Coverage|
|<||Up to 300 Mbps Wireless Speed and Backward Compatible to 802.11a|
|<||Built-in Dual Polarity 10 dBi Directional Antenna Maximizes Wireless Connectivity|
Product details case study
Delivers Robust Long-Distance Signal
High 400mW transmit power delivers long-distance signal for Point-to-Point wireless bridging to other buildings.
Maximizes Wireless Connectivity Over Long Distances
10 dBi internal directional antenna with dual polarity design propagates a more focused signal beam for targeting other outdoor client bridges or providing wireless network connectivity to a specific outdoor area in Access Point mode.
Great for Streaming Media or Transferring Large Files
Up to 300 Mbps wireless speed when connected to another 5 GHz Wireless N300 device. Complies with IEEE802.11a/n standards.
Supports SSID-to-VLAN Tagging
Can be configured to broadcast up to four (4) SSIDs. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
Extends the Network Further
Acts as an extension of an existing home or small business network for video streaming, voice & data intensive applications.
Simplified AP Monitoring and Management
For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux.
The ENS500 is a high-speed, long-range outdoor 802.11n Wireless N300 Client Bridge and Access Point that operates in the 5GHz frequency band so it avoids the congested wireless traffic from devices on the more commonly used 2.4 GHz frequency band. This makes the ENS500 an ideal solution for building-to-building wireless bridging, for stable streaming of video from connected IP security cameras in parking lots or garages back to a company network, or for sending data to outdoor digital signage. The ENS500 can also be used in other operational modes including as an Access Point to offer wireless network connectivity to a more defined outdoor venue rather than a more general outdoor area around it.
RF: 5 GHz Frequency Band (5.18 to 5.825 GHz)
Standard: IEEE 802.11a/n
Data Rate: Up to 300 Mbps
Flash Memory: 16MB
Power Consumption: Up to 6.9W
Internal 10 dBi directional antenna with Dual Polarization
2 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A
Access Point, Client Bridge, Client Router, WDS
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)
Hide SSID in beacons
MAC Address Filtering, Up to 50 Fields
Wireless STA (Client) Connection List
QoS (Quality of Service)
WMM (Wireless Multimedia)
Wireless / Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
VLAN Tagging, VLA Pass-through
Environmental & Mechanical
Operating: 90% or less
Storage: 90% or less
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights
Weight: 0.7 lbs.
Packaging Dimensions & Weight
Weight: 1.56 lbs.
ENS500 Client Bridge/Access Point
PoE Injector (EPE1212)
Pole Mount Set
Quick Start Guide
Technical Support Card